Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.906 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.312 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 2.2500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AMGS | SECOND END HOLE DIAMETER | 0.1875 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 1.2500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AAHG | FIRST END GROOVE WIDTH | 0.3125 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.437 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AMDL | FIRST END DIAMETER | 1.7500 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 2.250 INCHES NOMINAL |